Extra Permanent Sticky Labels

Custom printed with your own artwork

We produce quality extra permanent sticky labels & stickers for both business and home users. Our extra sticky labels are supplied on sheets with a glossy finish. We can also trim them individually if requested.

If you're in need of a sticker that will stick to almost everything, these are for you. With an extra strong adhesive, you can stick these waterproof labels to all clean smooth surfaces along with rough surfaces such as wood, ABS plastic and concrete. The adhesive has been specially formulated for sticking to low energy surfaces with a longer lasting bond than that of a standard adhesive.

These are the stickiest waterproof labels that we produce and they come in a wide selection handy shapes and sizes. We have made available a vast selection that are available to purchase instantly online. The best part, extra permanent material is in stock and your labels will be produced and dispatched within 48-72 hours of your proof approval. To place an order or to view prices, select a shape from the selection below. Read More...



Design Online | Upload your Artwork | Email your Artwork....the choice is yours!
We have provided you with a single one-stop-shopping facility for your extra permanent adhesive labels, simply select a shape from the options below to get started.


Absolutely No Risk

It's time to relax, your order will be processed by our professional staff, who each have many years of print industry experience. Your order is very important to both you and us, so we treat it with the respect it deserves. If you are not entirely happy with your order, we promise to reprint it asap or give you a full refund.

Experienced Professionals

In the past few years, our staff have produced more than 7,000 individual label orders for over 5,000 clients. With a return rate of less then 0.1% for all orders. These figures alone show the dedication and quality of our work. We have wisely invested in high-end printing presses to cater for all printing requirements.

Great Service

100% based in the UK, our sales staff will help you through your order if necessary. Our friendly team will take your order over the phone if you prefer, or via email. If you have any queries relating to an order, we can answer them straight away. Once you receive your order, we invite you to write a short review of your purchase which eventually gets displayed publicly on our website.

Environmentally Concience

Everyone has a duty to preserve the environment. We try to be as environmentally friendly as possible. We recycle all waste and printing consumables. The inks that we use have been made as environmentally friendly as possible and ink waste is disposed of using environmentally safe processes.

100 micron Waterproof Vinyl Labels

Our extra permanent sticky labels can be used for both indoor and outdoor applications. They are available with a popular glossy finish suitable for many applications. All our extra permanent labels are printed with eco-solvent inks which are themselves completely waterproof and offer a level of scratch and UV resistance. Ideally used for product labelling, they can also be used throughout thousands of other industries. They are truely a multi-purpose label that fit nearly all modern labelling requirements.

Artwork Setup

When designing your extra sticky labels, please feel free to add whatever colour you choose. From Pantone colours to solid and tinted colours, we support all CMYK colour formats. You may want to add a solid background colour, this is no problem, just remember to supply the artwork with 2mm of bleed around the edges of the design.

Adhesives

These labels come with a special extra permanent adhesive that has been designed to stick to low energy surfaces. Such items include; car bumpers, laptops, medals, wood and rough metals. This adhesive gives your labels that extra bond that is required when sticking onto these low energy surfaces. When you find that a standard label will not provide the bonding strength required, you can be assured that these will be of help.

Fast Turnaround

Our service is amongst the very best. We proof your design via email within a few hours of your order. The proof you receive has been checked for errors by our experienced pre-press staff and is ready to hit the press. As soon as you approve your electronic PDF proof, the countdown has started. We will print, trim and pack your order for delivery within 48 hours subject to the current workload.

Next Day Delivery Service

Once your label order has been printed and packed up, our courier will collect it from us and it will be booked in for next day delivery (excluding weekends and holidays). Somebody will need to be in to sign for the parcel as our courier cannot leave it without an authorised signature at the address stated. If you require, you can have it delivered to your work address, simply fill in the correct delivery address within the online checkout. Be sure to add your correct phone number and email address as this is used by the courier when delivering your parcel.

Track your order

Once you place an order with us online, you will receive your order number. You can login to your account on our website and check the status of your order anytime. When we update the status of your order, you will be notified via email. When your order is complete and dispatched, you will receive a tracking number from the courier. You can then login to their website to track your order through the couriers network.

Express Service

If you require your labels in a hurry / immediately in most cases, we may be able to help you. Please call or email us to see when your can receive your labels at the earliest. Obviously make sure that you have artwork ready to print before you call as we will need to start the process quickly to get your order dispatched.

Size & Bleed

Always set your artwork up at the correct size, it makes it easier for everyone involved. If any of your design bleeds of the edge of the label, ensure you add at least 2mm on artwork extra on each edge of the label.

Colour Mode

We print in a CMYK mode. This means that all colours you see on screen can be achieved on the printed sheet. If you are designing your labels using RGB mode you will notice a slight colour shift in your printed labels when finally printed. This is because many colours in the RGB mode are not within the CMYK colour gamut. We convert your artwork to CMYK upon receipt if it has not already been done.

Resolution

We advise you to set your resolution to a minimum of 350dpi at actual size. This ensures that all text and graphics when printed are legible. We will usually let you know if we feel that a design will not be legible before we go to print. This is however your own responsibility as we cannot always tell from the artwork file.

CMYK 100% Black

When setting up black text, always use the CMYK colour mode as discussed earlier. You will need to ensure all text is made from 100% Black only and not a mix of RGB or CMYK colours. We can not be held responsible if your artwork is set-up incorrectly and text doesn't print as crisp as it possibly could do. We provide these artwork guides to ensure you get the best possible print. Feel free to discuss any artwork requirements with us.

Extra Permanent Labels Super Sticky!

Labels can be used for a wide range of applications but if you can’t get a bond to the surface, you’re out of luck. Low energy surfaces are particularly difficult for stickers to bond with, making it impossible to use them. Low energy surfaces include materials such as silicone rubber and certain types of plastic. But the good news is that this doesn’t mean you can’t create a bond; you just need to have the right kind of adhesive on your stickers and labels.


Extra permanent stickiness – just for you!

We know that there may be times when sticking something to a low energy surface might be really useful so that’s why we’ve created our extra permanent super sticky range! These clever little labels hang on to every surface, including those which are classed as low energy, giving you more options. And of course, just like all of our other ranges of stickers, we provide this cutting edge technology at the lowest possible price. We never cut back on quality but we keep our costs low to provide you with the greatest possible choice. Why not take a closer look at how this range of labels works?

What is the problem with a low energy surface?

As a general rule, the higher energy a surface has, the better bond it will create with any other substance being stuck onto it. The problem arises with low energy surfaces. More specifically, surfaces which have lower energy than the adhesive being applied. In order for a bond to be created, the surface area must be ‘wetted’; to do this means the adhesive must be able to spread out, even on a microscopic level. If you think about a car bumper and what happens if you sprinkle some water on it: rather than run into lakes or puddles, the water will bead. The same thing happens when a regular adhesive is applied and that’s the reason it won’t stick properly. Any surface made from a similar material will repel any item which tries to stick to it, unless the glue has special qualities. And that’s what this extra permanent super sticky range provides: glue with the ability to spread out and cling to surfaces which naturally inhibit the wetting process.

Superior qualities

Stickers which are able to stick to a low energy surface have to be able to resist a variety of factors, including water, so they are a particularly durable and robust type of label. In order to work properly, these types of labels must be able to stick on to the low energy surface without wrinkling, cracking, shrinking or peeling off. The adhesive that’s needed in order to perform this type of action is extremely heavy duty, so you can expect it to perform well once stuck in place. Of course it’s not just car bumpers that you might want to stick a label too, and it might not always be outside. Plastics present a particular problem to normal stickers and that’s when a hi-tack, non-slip sticker is required. If you’re struggling to get a regular sticker in place, it’s worth asking yourself whether the surface could be low energy as that would explain why. A test with a hi-tack sticker will soon show you whether the problem can be overcome with a stronger adhesive. If you need a sticker for low energy surface you can still create the image, in the same regular way so you can have practical, tough function plus an attractive design.

Conclusion

Super sticky labels are the solution to a frustrating problem with low energy surfaces, delivering the ability to create stickers and labels which will last. Super sticky isn’t the only specialist material we do, why not take a look through to see if there’s anything else which could deliver the results you really want. All our prices are available online so why not have a look for yourself?

Copyright © 2016 Stickythings Limited. Designed by Stickythings Limited